Using the 2.4 GHz Godox X wireless radio system, the Godox XPro-P TTL Wireless Flash Trigger for Pentax can be used to effectively and reliably trigger flashes from up to 328′ away, and when used with compatible flashes and receivers users will have the added benefit of remote power control.

This model is compatible with Pentax’s TTL system, including support for high-speed sync up to 1/8000 second, and offers advanced control options along with settings for working with system-specific features. For ensuring maximum reliability and control, users can set up 16 groups on one of 32 channels and can then access 99 wireless ID settings for limiting interference from other nearby systems.

In addition to basic manual and TTL control modes, other settings are available, including stroboscopic flash and second-curtain sync. Users can adjust flash exposure compensation from -3 to +3 EV as well as wirelessly control the modeling light, zoom setting, and more.

For using the XProP with other camera systems there is a 2.5mm sync port that supports triggering via a wired connection. Also, a USB Type-C port is present for firmware updates and the devices run on two AA batteries for convenience.

Features of the Godox XPro-P TTL Wireless Flash Trigger for Pentax

• XPro-P TTL Wireless Flash Trigger can control the flashes with built-in Godox wireless X system, e.g. cameras flashes, outdoor flashes and studio flashes
• Featuring multi-channel triggering and stable signal transmission, this flash trigger applies to hotshoe mounted Sony cameras, Full Graphic Display of 5 Groups simultaneously, large Dot Matrix LCD panel display, Type-C USB port for firmware upgrade
• 16 groups and 32 channels to wirelessly control and trigger, add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively
• Smart TCM function for transform the TTL shooting value into the output value in M mode by Long Press TCM Button, Switch between the One-Group and Multi-Group Mode by Short Press TCM Button
• Fully support TTL autoflash, 1/8000s high speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, Magnification function, One-shoot & Multi-shoot setting, groups modeling lamp control, group zooming, adjusting all groups output value simultaneously, etc.

Specifications of the Godox XPro-P TTL Wireless Flash Trigger for Pentax

• Model: XPro-P
• Compatible cameras: Pentax cameras (TTL autoflash) Support for the cameras that have PC sync socket.
• Power supply: 2’AA batteries
• TTL autoflash: TTL
• Manual flash: Yes
• Stroboscopic flash: Yes
• High-speed sync: Yes
• Second-curtain sync: Yes
• Flash exposure compensation: Yes. 士3 stops in 1/3 stop increments
• Flash exposure lock: Yes
• Focus assist: Yes
• Modeling lamp: Control the modeling lamp by the flash trigger
• Beeper: Control the beeper by the flash trigger
• Wireless setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack
• ZOOM setting: Adjust the ZOOM value by the transmitter
• TCM function: Transform the TTL shooting value into the output value in the M node
• Firmware upgrade: Upgrade through the Type-C USB port
• Memory function: Settings will be stored 2 seconds after last operation and recover after a restart
• Transmission range (approx.) : 0-100m
• Built-in wireless: 24G
• Modulation mode: MSK
• Channel: 32
• Wireless ID: 01-99
• Group: 16
• Display: Large LCD panel, backlighting ON or OFF
• Dimension/Weight: 90x58x50mm/80g

For more detailed specifications see here. To see other Godox Products Click Here.